Fax And Modem Capabilities; Mediant 600 & Mediant - AudioCodes Mediant 600 User Manual

User's Manual
d. From the 'Max Echo Canceller Length' drop-down list (MaxEchoCancellerLength),
select the maximum echo path delay (tail length) for the echo canceller.
Note:
13.2

Fax and Modem Capabilities

This section describes the device's fax and modem capabilities and corresponding
configuration. The fax and modem configuration is done in the Fax/Modem/CID Settings
page.
Notes:

To access the fax and modem parameters:
1. Open the Fax/Modem/CID Settings page (Configuration tab > VoIP menu > Media
submenu > Fax/Modem/CID Settings).
Version 6.6
The following additional echo cancellation parameters are configurable only
through the ini file:
•
ECHybridLoss - defines the four-wire to two-wire worst-case Hybrid loss
•
ECNLPMode - defines the echo cancellation Non-Linear Processing
(NLP) mode
•
EchoCancellerAggressiveNLP - enables Aggressive NLP at the first 0.5
second of the call
•
Unless otherwise specified, the configuration parameters mentioned in
this section are available on this page.
•
Some SIP parameters override these fax and modem parameters. For
example, the IsFaxUsed parameter and V.152 parameters in Section
'V.152 Support' on page 168).
•
For a detailed description of the parameters appearing on this page, see
'Configuration Parameters Reference' on page 609.
Figure 13-4: Fax/Modem/CID Settings Page
159
13. Media
Mediant 600 & Mediant 1000