Gateway And Ip-To-Ip Parameters; Fax And Modem Parameters - AudioCodes MP-11x User Manual

User's Manual

44.11 Gateway and IP-to-IP Parameters

44.11.1 Fax and Modem Parameters

The fax and modem parameters are described in the table below.
Parameter
Web: Fax Transport Mode
EMS: Transport Mode
[FaxTransportMode]
Web: V.21 Modem Transport Type
EMS: V21 Transport
[V21ModemTransportType]
Web: V.22 Modem Transport Type
EMS: V22 Transport
[V22ModemTransportType]
Web: V.23 Modem Transport Type
EMS: V23 Transport
[V23ModemTransportType]
Web: V.32 Modem Transport Type
EMS: V32 Transport
[V32ModemTransportType]
Web: V.34 Modem Transport Type
EMS: V34 Transport
[V34ModemTransportType]
Version 6.6
Table 44-38: Fax and Modem Parameters
Determines the fax transport mode used by the device.

[0] Disable = transparent mode

[1] T.38 Relay (default)

[2] Bypass

[3] Events Only
Note: This parameter is overridden by the parameter
IsFaxUsed. If the parameter IsFaxUsed is set to 1 (T.38 Relay)
or 3 (Fax Fallback), then FaxTransportMode is always set to 1
(T.38 relay).
Determines the V.21 modem transport type.

[0] Disable = (Default) Disable (Transparent)

[2] Enable Bypass

[3] Events Only = Transparent with Events
Note: This parameter can also be configured in an IP Profile.
Determines the V.22 modem transport type.

[0] Disable = Disable (Transparent)

[2] Enable Bypass (default)

[3] Events Only = Transparent with Events
Note: This parameter can also be configured in an IP Profile.
Determines the V.23 modem transport type.

[0] Disable = Disable (Transparent)

[2] Enable Bypass (default)

[3] Events Only = Transparent with Events
Note: This parameter can also be configured in an IP Profile.
Determines the V.32 modem transport type.

[0] Disable = Disable (Transparent)

[2] Enable Bypass (default)

[3] Events Only = Transparent with Events
Notes:

This parameter applies only to V.32 and V.32bis modems.

This parameter can also be configured in an IP Profile.
Determines the V.90/V.34 modem transport type.

[0] Disable = Disable (Transparent)

[2] Enable Bypass (default)

[3] Events Only = Transparent with Events
Note: This parameter can also be configured in an IP Profile.
565
44. Configuration Parameters Reference
Description
MP-11x & MP-124