AudioCodes Mediant 600 User Manual page 833

User's Manual
Parameter
Threshold
[EnergyDetectorThresh
old]
Pattern Detection Parameters
Note: For an overview on the pattern detector feature for TDM tunneling, see DSP Pattern
Detector on page 284.
Web: Enable Pattern
Detector
[EnablePatternDetector]
[PDPattern]
[PDThreshold]
Media Resource Control Protocol (MRCP) / Real Time Streaming Protocol (RTSP)
Parameters
[MRCPDefaultMIMEType
]
[MRCPEnabled]
[MRCPMaxPorts]
[MRCPServerName]
[MRCPServerIp]
[MRCPServerPort]
[RTSPConnectionRetryI
nterval]
[RTSPEnabled]
Version 6.6
threshold invokes an 'Above' or 'Below' event.
The threshold is calculated as follows:
Actual Threshold = -44 dBm + (EnergyDetectorThreshold * 6)
The valid value range is 0 to 7. The default is 3 (i.e., -26 dBm).
Enables the Pattern Detector (PD) feature.

[0] Disable (default)

[1] Enable
Defines the patterns that can be detected by the Pattern Detector.
The valid range is 0 to 0xFF.
Note: For this parameter to take effect, a device reset is required.
Defines the number of consecutive patterns to trigger the pattern
detection event.
The valid range is 0 to 31. The default is 5.
Note: For this parameter to take effect, a device reset is required.
Determines the default format for speech recognition for inline
grammars.

[0] = (Default) Indicates GRXML

[1] = Indicates GL (Nuance format)
Activates the Media Resource Control Protocol (MRCP) functionality.

[0] = Disable (default)

[1] = Activate
Defines the number of ports that are allocated to running MRCP-
related activities such as speech recognition and text-to-speech. A
port is considered duplex, so that speech recognition and text-to-
speech can run on the same port. The value should not exceed the
number of channels in the system.
The range is 0 - 120. The default is 10.
Defines the hostname of the MRCP server. This is used to build a URI
for the server. The default is NULL.
Defines the IP address of the MRCP speech server. The default is
0.0.0.0.
Defines the control port on the MRCP speech server.
The range is 0 - 65,535. The default is 554.
Defines the time (in seconds) that the system must wait before trying
to create a socket for the RTSP speech server if the socket was never
created or was created and then brought down.
The range is 0 - 65,535. The default is 10.
Note: For this parameter to take effect, a device reset is required.
Activates the RTSP functionality.
833
52. Configuration Parameters Reference
Description
Mediant 600 & Mediant 1000