AudioCodes Mediant 600 User Manual page 271

User's Manual
•
'IP Profile ID': enter "1" to indicate the IP Profile configured for G.711.
7. Configure Index #6 to route dialed calls (four digits starting with digit 4) from IP-PBX
to remote IP-PBX users. The device searches its database for the remote users
registered number, and then sends an INVITE to the remote user's IP address (listed
in the database):
•
'Source IP Group ID': select 3 to indicate received (inbound) calls identified as
belonging to the IP Group configured for the IP-PBX.
•
'Dest Phone Prefix': enter the "4xxx#" to indicate all calls dialed from IP-PBX that
include four digits and start with the digit 4.
•
'Dest IP Group ID': select 4 to indicate the destination IP Group to where the calls
must be sent, i.e., to remote IP-PBX users.
•
'IP Profile ID': enter "1" to indicate the IP Profile configured for G.711.
Version 6.6
20. IP-to-IP Routing Application
271 Mediant 600 & Mediant 1000