Viewing Analog Port Information; Viewing Nfas Groups And D-Channel Status - AudioCodes Mediant 600 User Manual

User's Manual
45.2

Viewing Analog Port Information

The Home page allows you to view detailed information on selected FXS and FXO analog
ports such as RTP/RTCP and voice settings.

To view information on an analog port:
1. Open the Home page.
2. On the graphical display of the device, click the required analog port; a shortcut menu
appears.
3. From the shortcut menu, choose Port Settings; the Basic Channel Information page
appears with the Basic tab selected (displayed in green):
4. To view additional channel information, click the required tab - SIP, RTP/RTCP, and
Voice Settings.
45.3

Viewing NFAS Groups and D-Channel Status

The NFAS Group & D-Channel Status page displays the status of the device's D-channels
and NFAS groups. The status of a D-channel and NFAS group can be "In Service" or "Out
of Service". This page also indicates whether the D-channel is a primary or backup D-
channel.
This page also enables you to manually switchover between active and standby D-
channels belonging to the same NFAS group. This is done using the Switch Activity
button. For more information, see 'Performing Manual D-Channel Switchover in NFAS
Group' on page 288.
Note:
Version 6.6
Figure 45-3: Basic Channel Information Page
This page is applicable only to T1 ISDN protocols supporting NFAS, and only
if the NFAS group is configured with two D-channels.
551
45. VoIP Status
Mediant 600 & Mediant 1000