AudioCodes Mediant 600 User Manual page 719

User's Manual
Parameter
Web: MWI Source
Number
EMS: MWI Source Name
[MWISourceNumber]
[MWISubscribeIPGroupI
D]
[NotificationIPGroupID]
[MWIQsigMsgCentreldID
PartyNumber]
Digit Patterns The following digit pattern parameters apply only to voice mail applications that use
the DTMF communication method. For the available pattern syntaxes, refer to the CPE
Configuration Guide for Voice Mail.
Web: Forward on Busy
Digit Pattern (Internal)
EMS: Digit Pattern
Forward On Busy
[DigitPatternForwardOn
Busy]
Web: Forward on No
Answer Digit Pattern
(Internal)
EMS: Digit Pattern
Forward On No Answer
[DigitPatternForwardOn
NoAnswer]
Version 6.6
Defines the calling party's phone number used in the Q.931 MWI
Setup message to PSTN. If not configured, the channel's phone
number is used as the calling number.
Defines the IP Group ID used when subscribing to an MWI server.
The 'The SIP Group Name' field value of the IP Group table is used
as the Request-URI host name in the outgoing MWI SIP SUBSCRIBE
message. The request is sent to the IP address defined for the Proxy
Set that is associated with the IP Group. The Proxy Set's capabilities
such as proxy redundancy and load balancing are also applied to the
message.
For example, if the 'SIP Group Name' field of the IP Group is set to
"company.com", the device sends the following SUBSCRIBE
message:
SUBSCRIBE sip:company.com...
Instead of:
SUBSCRIBE sip:10.33.10.10...
Note: If this parameter is not configured, the MWI SUBSCRIBE
message is sent to the MWI server as defined by the MWIServerIP
parameter.
Defines the IP Group ID to which the device sends SIP NOTIFY MWI
messages.
Notes:

This is used for MWI Interrogation. For more information on the
interworking of QSIG MWI to IP, see Message Waiting Indication
on page 357.

To determine the handling method of MWI Interrogation
messages, use the TrunkGroupSettings_MWIInterrogationType,
parameter (in the Trunk Group Settings table).
Defines the Message Centred ID party number used for QSIG MWI
messages. If not configured (default), the parameter is not included in
MWI (activate and deactivate) QSIG messages.
The valid value is a string.
Defines the digit pattern used by the PBX to indicate 'call forward on
busy' when the original call is received from an internal extension.
The valid range is a 120-character string.
Defines the digit pattern used by the PBX to indicate 'call forward on
no answer' when the original call is received from an internal
extension.
The valid range is a 120-character string.
719
52. Configuration Parameters Reference
Description
Mediant 600 & Mediant 1000