AudioCodes Mediant 600 User Manual page 89

User's Manual
Notes:
Parameter
Index
[SNMPUsers_Index]
User Name
[SNMPUsers_Username]
Authentication Protocol
[SNMPUsers_AuthProtoc
ol]
Privacy Protocol
[SNMPUsers_PrivProtocol
]
Authentication Key
[SNMPUsers_AuthKey]
Privacy Key
[SNMPUsers_PrivKey]
Group
[SNMPUsers_Group]
Version 6.6
•
If you delete a user that is associated with a trap destination (in
'Configuring SNMP Trap Destinations' on page 86), the configured trap
destination becomes disabled and the trap user reverts to default (i.e.,
SNMPv2).
•
The SNMP v3 Users table can also be configured using the table ini file
parameter, SNMPUsers (see 'SNMP Parameters' on page 623).
SNMP V3 Users Parameters
The table index.
The valid range is 0 to 9.
Name of the SNMP v3 user. This name must be unique.
Authentication protocol of the SNMP v3 user.

[0] None (default)

[1] MD5

[2] SHA-1
Privacy protocol of the SNMP v3 user.

[0] None (default)

[1] DES

[2] 3DES

[3] AES-128

[4] AES-192

[5] AES-256
Authentication key. Keys can be entered in the form of a text
password or long hex string. Keys are always persisted as long hex
strings and keys are localized.
Privacy key. Keys can be entered in the form of a text password or
long hex string. Keys are always persisted as long hex strings and
keys are localized.
The group with which the SNMP v3 user is associated.

[0] Read-Only (default)

[1] Read-Write

[2] Trap
Note: All groups can be used to send traps.
Description
89
6. SNMP-Based Management
Mediant 600 & Mediant 1000