AudioCodes Mediant 600 User Manual page 800

Parameter
Trunk Group Settings
Web: Trunk Group Settings
EMS: SIP Routing > Hunt
Group
[TrunkGroupSettings]
Web: Channel Select
Mode
EMS: Channel Selection
Mode
[ChannelSelectMode]
Web: Default Destination
Number
[DefaultNumber]
User's Manual
TrunkGroup 1 = 2, 0, 1, 4, 208, 0, 0 ,2;
Notes:

Trunk Group ID 1 is denoted as 0 in the table.

This parameter can appear up to four times per module.

For a description of this table, seeConfiguring Trunk Group Table
on page 291.
This table parameter configures the rules for channel allocation per
Trunk Group. The format of this parameter is as follows:
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_Index =
TrunkGroupSettings_TrunkGroupId,
TrunkGroupSettings_ChannelSelectMode,
TrunkGroupSettings_RegistrationMode,
TrunkGroupSettings_GatewayName,
TrunkGroupSettings_ContactUser,
TrunkGroupSettings_ServingIPGroup,
TrunkGroupSettings_MWIInterrogationType,
TrunkGroupSettings_TrunkGroupName;
[\TrunkGroupSettings]
For example:
TrunkGroupSettings 0 = 1, 0, 5, branch-hq, user, 1, 255, ;
TrunkGroupSettings 1 = 2, 1, 0, localname, user1, 2, 255, ;
Note: For a description of this table, see 'Configuring Trunk Group
Settings' on page 293.
Defines the method for allocating incoming IP-to-Tel calls to a
channel for all Trunk Groups.

[0] By Dest Phone Number (default)

[1] Cyclic Ascending

[2] Ascending

[3] Cyclic Descending

[4] Descending

[5] Dest Number + Cyclic Ascending.

[6] By Source Phone Number

[7] Trunk Cyclic Ascending

[8] Trunk & Channel Cyclic Ascending

[9] Ring to Hunt Group

[10] Select Trunk by ISDN SuppServ Table

[11] Dest Number + Ascending
Notes:

For a detailed description of the parameter's options, see
'Configuring Trunk Group Settings' on page 293.

Channel select mode per Trunk Group can be configured in the
Trunk Group Settings (see 'Configuring Trunk Group Settings' on
page 293).
Defines the default destination phone number, which is used if the
received message doesn't contain a called party number and no
phone number is configured in the Trunk Group Table' (see
Configuring the Trunk Group Table on page 291). This parameter is
used as a starting number for the list of channels comprising all the
device's Trunk Groups.
800
Mediant 600 & Mediant 1000
Description
Document #: LTRT-83313