Modifying And Saving Parameters - AudioCodes Mediant 600 User Manual

User's Manual
4.1.6.2.2 Showing / Hiding Parameter Groups
Some pages provide groups of parameters, which can be hidden or shown. To toggle
between hiding and showing a group, simply click the group title button that appears above
each group. The button appears with a down-pointing or up-pointing arrow, indicating that it
can be collapsed or expanded when clicked, respectively.
Figure 4-8: Expanding and Collapsing Parameter Groups
4.1.6.3

Modifying and Saving Parameters

When you modify a parameter value on a page, the Edit
the parameter. This indicates that the parameter has been modified, but has yet to be
applied (submitted). After you apply your modifications, the
Figure 4-9: Edit Symbol after Modifying Parameter Value

To save configuration changes on a page to the device's volatile memory (RAM),
do one of the following:

On the toolbar, click the Submit

At the bottom of the page, click the Submit
When you click Submit, modifications to parameters with on-the-fly capabilities are
immediately applied to the device and take effect. Parameters displayed on the page with
the lightning
'Resetting the Device' on page 491.
Version 6.6
symbol take effect only after a device reset. For resetting the device, see
button.
button.
47
4. Web-Based Management
symbol appears to the right of
symbol disappears.
Mediant 600 & Mediant 1000