AudioCodes Mediant 600 User Manual page 333

Voip media gateways analog & digital lines
Hide thumbs Also See for Mediant 600:
Table of Contents

Advertisement

User's Manual
To configure IP-to-Tel or inbound IP routing rules:
1.
Open the Inbound IP Routing Table page (Configuration tab > VoIP menu > GW and
IP to IP submenu > Routing > IP to Trunk Group Routing).
The previous figure displays the following configured routing rules:
Rule 1: If the incoming IP call destination phone prefix is between 10 and 19, the
call is assigned settings configured for IP Profile ID 2 and routed to Trunk Group
ID 1.
Rule 2: If the incoming IP call destination phone prefix is between 501 and 502
and source phone prefix is 101, the call is assigned settings configured for IP
Profile ID 1 and routed to Trunk Group ID 2.
Rule 3: If the incoming IP call has a From URI host prefix as domain.com, the call
is routed to Trunk Group ID 3.
Rule 4: If the incoming IP call has IP address 10.13.64.5 in the INVITE's Contact
header, the call is identified as an IP-to-IP call and assigned to Source IP Group
4. This call is routed according to the outbound IP routing rules for this Source IP
Group configured in the Outbound IP Routing Table.
2.
Configure the routing rule, as required. For a description of the parameters, see the
table below.
3.
Click Submit to apply your changes.
Parameter
IP to Tel Routing Mode
[RouteModeIP2Tel]
Matching Characteristics
Web: Dest. Host Prefix
[DestPrefix]
Version 6.6
Figure 24-3: Inbound IP Routing Table
IP-to-Tel or Inbound IP Routing Table Description
Determines whether to route the incoming IP call before or after
manipulation of destination number, configured in 'Configuring
Source/Destination Number Manipulation' on page 299.
[0] Route calls before manipulation = (Default) Incoming IP calls are
routed before number manipulation.
[1] Route calls after manipulation = Incoming IP calls are routed after
number manipulation.
Defines the Request-URI host name prefix of the incoming SIP INVITE
message. If this routing rule is not required, leave the field empty.
Note: The asterisk (*) wildcard can be used to depict any prefix.
Description
333
24. Routing
Mediant 600 & Mediant 1000

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediant 1000

Table of Contents