AudioCodes Mediant 600 User Manual page 237

User's Manual
Parameter
Max Num Bodies
[MessagePolicy_MaxN
umBodies]
Send Rejection
[MessagePolicy_SendR
ejection]
Method List
[MessagePolicy_Metho
dList]
Method List Type
[MessagePolicy_Metho
dListType]
Body List
[MessagePolicy_BodyL
ist]
Body List Type
[MessagePolicy_BodyL
istType]
Version 6.6
response.
Defines the maximum number of bodies (e.g., SDP) in the SIP message.
The valid value is any number up to 8. The default is 8.
Determines whether the device sends a 400 "Bad Request" response if a
message request is rejected.

[0] Policy Reject = (Default) If the message is a request, then the
device sends a response to reject the request.

[1] Policy Drop = The device ignores the message without sending
any response.
Defines the SIP methods (e.g., INVITE\BYE) to which the rule applies.
The syntax for entering the methods is as follows:

Methods must be separated by a backslash (\).

The entered value is not case sensitive.
Determines the policy for the SIP methods.

[0] Policy Blacklist = The specified methods (in the 'Method List' field)
are rejected by the policy.

[1] Policy Whitelist = (Default) The specified methods (in the 'Method
List' field) are allowed by the policy.
Defines the SIP body (i.e., value of the Content-Type header) to which
the rule applies.
Determines the policy for the defined SIP body.

[0] Policy Blacklist =The specified SIP body (in the 'Body List' field) is
rejected by the policy.

[1] Policy Whitelist = (Default) The specified SIP body (in the 'Body
List' field) is allowed by the policy.
237
Description
Mediant 600 & Mediant 1000
17. SIP Definitions