Displaying Login Information Upon Login - AudioCodes Mediant 600 User Manual

User's Manual
Parameter
Web: User Level
4.4

Displaying Login Information upon Login

The device can display login information immediately upon Web login.

To enable display of user login information upon a successful login:
1. Open the WEB Security Settings page (Configuration tab > System menu >
Management submenu > WEB Security Settings).
2. From the 'Display Login Information' drop-down list, select Yes.
3. Click Submit to apply your changes.
Once enabled, the Login Information window is displayed upon a successful login, as
shown in the example below:
Version 6.6
Defines the user's access level.

Monitor = (Default) Read-only user. This user can only view Web
pages and access to security-related pages is denied.

Admin = Read/write privileges for all pages, except security-related
pages including the Web Users table where this user has only
read-only privileges.

SecAdmin = Read/write privileges for all pages. This user is the
Security Administrator.

Master-User = Read/write privileges for all pages. This user also
functions as a security administrator.
Notes:

At least one Security Administrator must exist. The last remaining
Security Administrator cannot be deleted.

The first Master user can be added only by a Security
Administrator user.

Additional Master users can be added, edited and deleted only by
Master users.

If only one Master user exists, it can be deleted only by itself.

Master users can add, edit, and delete Security Administrators (but
cannot delete the last Security Administrator).

Only Security Administrator and Master users can add, edit, and
delete Admin and Monitor users.
Figure 4-32: Login Information Window
71
4. Web-Based Management
Description
Mediant 600 & Mediant 1000