Function Group: Operation - Endress+Hauser PROline Prosonic Flow 93 Function Manual

PROline Prosonic Flow 93 FOUNDATION Fieldbus
Endress+Hauser

5.1.3 Function group: OPERATION

Þ
USER INTERFACE C
USER INTERFACE
TEST DISPLAY Use this function to test the operability of the local display and its pixels.
(2040)
Options:
OFF
ON
Factory setting:
OFF
Test sequence:
1. Start the test by selecting ON.
2. All pixels of the main line, additional line and information line are darkened
3. Main line, additional line and information line show an "8" in each field for
4. Main line, additional line and information line show a "0" in each field for
5. Main line, additional line and information line show nothing (blank display)
When the test completes the local display returns to its initial state and the
setting changes to "OFF."
CONTROL CAA
Function description
→
CONTROL
for minimum 0.75 seconds.
minimum 0.75 seconds.
minimum 0.75 seconds.
for minimum 0.75 seconds.
5 Block USER INTERFACE
Þ
BASIC CONFIGURATION 200
ß
UNLOCKING/LOCKING 202
ß
OPERATION
→
OPERATION
204
27