Funktion Group: Additional Configuration - Endress+Hauser PROline Prosonic Flow 93 Function Manual

PROline Prosonic Flow 93 FOUNDATION Fieldbus
Endress+Hauser

3.2.2 Funktion group: ADDITIONAL CONFIGURATION

MEASURED
Þ
A
VARIABLES
MEASURED VARIABLES


Note!
The units selected here have no effect on the FOUNDATION Fieldbus. They are only used for the local
display and for assigned instrument functions.
UNIT TEMPERATURE Use this function to select the unit for displaying the liquid temperature.
(0422)


The fluid temperature is entered in the TEMPERATURE function, (see
Page 60).
Options:
°C (Celsius)
°F (Fahrenheit)
Factory setting:
Depends on country (°C or °F), see factory setting Page 76 ff.
UNIT VISCOSITY Use this function to select the unit for fluid viscosity.
(0423)


The viscosity is entered in the VISCOSITY function, (see Page 61).
Options:
mm²/s
cSt
St
Factory setting:
mm²/s
UNIT LENGTH Use this function to select the unit for the measure of length.
(0424)
The unit you select here is valid for:
• Nominal diameter
• Diameter
• Wall thickness
• Liner thickness
• Path length
• Wire length
• Sensor distance
Options:
MILLIMETER
INCH
Factory setting:
Depends on country (MILLIMETER or INCH),
see factory setting Page 76 ff.
MEASURED VALUES
ß
SYSTEM UNITS
Function description
→ →
SYSTEM UNITS
Note!
K (Kelvin)
R (Rankine)
Note!
3 Block MEASURED VARIABLES
AAA
Þ
ACA CONFIGURATION
ß
ADDIT. CONFIG.
ADDITIONAL CONFIGURATION
040
042
17