Endress+Hauser PROline Prosonic Flow 93 Function Manual page 98

2 Resource Block
98
Parameter Write access with
operating mode
(MODE_BLK)
WRITE_LOCK read only
WRITE_PRI AUTO - OOS
PROline Prosonic Flow 93 FOUNDATION Fieldbus
Resource Block / base index 258
Description
Displays the status of the hardware write protection.
Display:
UNINITIALIZED
LOCKED
It is not possible to write to the device via the FOUNDATION
Fieldbus.
NOT LOCKED
Device data can be modified via the FOUNDATION Fieldbus.


Note!
For information on hardware write protection configuration, see the
Operating Instructions for PROline Prosonic Flow 93 FOUNDATION
Fieldbus, BA078D/06/en, Section 5.4.
Specifies the action taken in the event of a write protection alarm,
(WRITE_ALM parameter, see Page 97).
User input:
0
The write protection alarm is not evaluated.
1
No report to the fieldbus host system in the event of a write
protection alarm.
2
Reserved for block alarms.
3-7
The write protection alarm is output with the appropriate priority
(3 = low priority, 7 = high priority) to the fieldbus host system as a
user notice.
8-15
The write protection alarm is output with the appropriate priority
(8 = low priority, 15 = high priority) to the fieldbus host system as a
critical alarm.
Factory setting:
0
Endress+Hauser