Function Group Measured Values - Endress+Hauser Dosimag Operating Instructions Manual

Appendix – function description
"
!
40
10.1.1 General notes
The function matrix comprises a multiplicity of functions which, for the sake of clarity, are arranged
in a number of function groups.
Caution!
Changing sensor characteristics influences numerous functions of the entire measuring system,
particularly measuring accuracy.
Such parameters normally cannot be altered and are thus protected. Please contact your
Endress+Hauser representative if you have any questions.
Note!
• The transmitter continues to measure while data entry is in progress, i.e. the current measured
values are output via the signal outputs in the normal way.
• If the supply voltage fails, all preset and configured values remain safely stored in the EEPROM or
DAT.
• For a large number of units, customized parameter configuration is available from the factory.
Please contact your Endress+Hauser representative.
10.2

Function group MEASURED VALUES

VOLUME FLOW
Function description
Function group MEASURED VALUES
!
Note!
• The engineering unit of the measured variables shown here can be set in the
SYSTEM UNITS function group (→ Page 41).
• If the fluid in the pipe flows backwards, a negative sign prefixes the flow reading.
The volume flow currently measured appears on the display.
Dosimag
Endress+Hauser