Group Control; Function Group: Basic Configuration - Endress+Hauser PROline Prosonic Flow 93 Function Manual

5 Block USER INTERFACE
24
5.1

Group CONTROL

5.1.1 Function group: BASIC CONFIGURATION

Þ
USER INTERFACE C
USER INTERFACE
LANGUAGE Use this function to select the language for all texts, parameters and
(2000) messages shown on the local display.
Options:
ENGLISH
DEUTSCH
FRANCAIS
ESPANOL
ITALIANO
NEDERLANDS
DANSK
NORSK
SVENSKA
SUOMI
BAHASA INDONESIA
JAPANESE (syllabary)
Factory setting:
Depends on country, see factory setting Page 76 ff.


If you press the
DISPLAY DAMPING Use this function to enter a time constant defining how the display reacts to
(2002) severely fluctuating flow variables, either very quickly (enter a low time
constant) or with damping (enter a high time constant).
User input:
0...100 seconds
Factory setting:
1 s


Setting the time constant to 0 seconds switches off damping.
CONTRAST LCD Use this function to optimise display contrast to suit local operating conditions.
(2003)
User input:
10...100%
Factory setting:
50%
PROline Prosonic Flow 93 FOUNDATION Fieldbus
CONTROL CAA
Function description
→ →
CONTROL BASIC CONFIGURATION
Note!
keys at startup, the language defaults to "ENGLISH".


Note!
Þ
BASIC CONFIGURATION 200
Endress+Hauser