Appendix - Function Description; Function Group Measuring Values - Endress+Hauser Dosimass Operating Instructions Manual

Dosimass
Endress+Hauser
11

Appendix - Function description

This Appendix provides you with a detailed description of, and information on, the individual device
functions of Dosimass. All the device functions can be selected and configured via the "FieldCare"
configuration program from Endress+Hauser ä 18.
Certain values or settings can deviate from the factory settings listed in the case of devices with
customer-specific configuration.

Function group MEASURING VALUES

Function group SYSTEM UNITS
Function group PULSE OUTPUT
Function group STATUS OUTPUT
Function group COMMUNICATION
Function group PROCESS PARAMETER
Function group SYSTEM PARAMETER
Function group SENSOR PARAMETER
Function group SUPERVISION
Function group SIMULATION
Function group SENSOR VERSION
Function group AMPLIFIER VERSION
11.1 Function group MEASURING VALUES
!
Note!
• The engineering unit of the measured variables shown here can be set in the SYSTEM UNITS function
group (ä 42).
• If the fluid in the pipe flows backwards, a negative sign prefixes the flow reading.
MASS FLOW
VOLUME FLOW
DENSITY
TEMPERATURE
ä 41
ä 42
ä 44
ä 46
ä 47
ä 47
ä 50
ä 51
ä 52
ä 53
ä 53
ä 53
Function description
Function group MEASURING VALUES
Use this function to display the mass flow.
Use this function to display the volume flow.
Use this function to display the density.
Use this function to display the fluid temperature.
Appendix - Function description
41