Function Group Operation; Basic Configuration 200; Operation - Endress+Hauser Proline Prosonic Flow 93C Description Of Device Functions

5 Block USER INTERFACE
24
5.1.3

Function group OPERATION

→
USER INTERFACE C
TEST DISPLAY Use this function to test the operability of the local display and its pixels.
(2040)
Options:
OFF
ON
Factory setting:
OFF
Test sequence:
1. Start the test by selecting ON.
2. All pixels of the main line, additional line and information line are darkened for
3. Main line, additional line and information line show an "8" in each field for minimum
4. Main line, additional line and information line show a "0" in each field for minimum
5. Main line, additional line and information line show nothing (blank display) for
When the test completes the local display returns to its initial state and the setting
changes to OFF.
Device functions Proline Prosonic Flow 93C PROFIBUS DP/PA
CONTROL
Functional description
USER INTERFACE → CONTROL → OPERATION
minimum 0.75 seconds.
0.75 seconds.
0.75 seconds.
minimum 0.75 seconds.
→
CAA

BASIC CONFIGURATION 200

↓
UN-/LOCKING
↓

OPERATION

Endress+Hauser
202
204