Device Functions Proline Promag 55 FOUNDATION Fieldbus
Endress+Hauser
5.1.3
Function group OPERATION
⇒
USER INTERFACE
C
TEST DISPLAY
Use this function to test the operability of the local display and its pixels.
(2040)
Options:
OFF
ON
Factory setting:
OFF
Test sequence:
1. Start the test by selecting ON.
2. All pixels of the main line, additional line and information line are darkened for
3. Main line, additional line and information line show an "8" in each field for minimum
4. Main line, additional line and information line show a "0" in each field for minimum
5. Main line, additional line and information line show nothing (blank display) for
When the test completes the local display returns to its initial state and the setting
changes to OFF.
CONTROL
Function description
→
USER INTERFACE
CONTROL
minimum 0.75 seconds.
0.75 seconds.
0.75 seconds.
minimum 0.75 seconds.
5 Block USER INTERFACE
⇒
CAA
BASIC CONFIGURATION 200
⇓
UNLOCKING/LOCKING 202
⇓
OPERATION
→
OPERATION
204
23