Group Operation - Endress+Hauser Proline t-mass 65 PROFIBUS DP Manual

Device Functions Proline t-mass 65 PROFIBUS DP
Endress+Hauser
5

Group OPERATION

LANGUAGE
ACCESS CODE
Function description OPERATION
Use this function to select the language for all texts, parameters and messages
shown on the local display.
Options:
ENGLISH
DEUTSCH
FRANCAIS
ESPANOL
ITALIANO
NEDERLANDS
NORSK
SVENSKA
SUOMI
PORTUGUES
POLSKI
CESKY
Factory setting:
Country dependent (see Page 41 ff.)
!
Note!
O S
If you press the keys at startup, the language defaults to ENGLISH.
!
Note!
This function is only relevant for local display and access via an operating program
(e.g. "FieldCare") and does not affect cyclic data transmission via the PROFIBUS
Master (class 1).
All data of the measuring system are protected against inadvertent change. Pro-
gramming is disabled and the settings cannot be changed until a code is entered in
this function.
O S
If you press the key in any function the measuring system automatically goes
to this function and the prompt to enter the code appears on the display (program-
ming disabled).
You can enable programming by entering the personal code
(Factory setting = 65, see the DEFINE PRIVATE CODE function)
User input:
max. 4-digit number: 0 to 9999
!
Note!
• The programming levels are disabled if you do not press a key within 60 seconds
following return to the HOME position.
• You can also disable programming in this function by entering any number (other
than the defined private code).
• Your Endress+Hauser service representative can be of assistance if you lose your
personal code.
5 Group OPERATION
15