PROFINET IO
3.1.3 Configuring the device
Included with the device is the program "Hirschmann Tool Calling Interface",
which you can install with the installation program
HirschmannToolCallingInterfaceXXXXXSetup.exe (XXXXX = soft-
ware version, e.g. 01000).
After installing the program "Hirschmann Tool Calling Interface", you have
the option of starting two Hirschmann operating programs in Simatic S7 in
order to perform more detailed device configurations.
In Simatic S7, right-click on a device and select Web-based Interface
(WWW) or Telnet in the drop-down menu.
Figure 15: Call up the Hirschmann operating program
Industrial Protocols
Release 5.0 04/09
3.1 Integration in Control System
37