Hirschmann RS20 Reference Manual page 189

Diagnostics
Parameters
Port
Utilization [%]
Lower Threshold
[%]
Upper Threshold
[%]
Alarm
Table 119:Network load (Utilization) table
RM GUI L2E
Release 8.0 05/2013
Meaning
Number of the device port to which the
table entry relates.
Shows the current utilization in percent
which the device port has received
within the last 30 s.
The utilization is the relationship of the
received data quantity to the maximum
possible data quantity at the currently
configured data rate.
Defines the lower threshold for
utilization. When the utilization of the
device port falls below this value, the
alarm is reset.
The value 0 deactivates the lower
threshold.
Defines an upper threshold for the
utilization. If the utilization of the device
port exceeds this value, the Alarm
field shows an alarm.
The value 0 deactivates the upper
threshold.
Indicates the alarm status for the
utilization.
– Selected
The utilization of the device port is
below the value defined in the Lower
Threshold [%] field or above the value
defined in the Upper Threshold [%]
field. The device sends an SNMP
message (trap).
– Not selected
The utilization of the device port is
above the value defined in the Lower
Threshold [%] field or below the value
defined in the Upper Threshold [%]
field.
7.3 Ports
Possible values Default
setting
1.1, 1.2, 1.3
etc.
0.00
0.00..100.00
0.00
0.00..100.00
0.00
0.00..100.00
Selected Not
Not selected selected
189