Hirschmann RS20 Reference Manual page 70

Security
Name
Action
Table 22: Wizard in the
After closing the Wizard, click "Set" to save your settings.
Note: Prerequisites for the device to be able to send an alarm (trap):
See "Alarms (Traps)" on page 205.
– You have entered at least one recipient
– You have selected at least one recipient in the "Active" column
– In the "Selection" frame, you have selected "Port Security".
Buttons

Button Meaning
Back Displays the previous page again. Changes are lost.
Next Saves the changes and opens the next page.
Finish Saves the changes and completes the configuration.
Cancel Closes the Wizard. Changes are lost.
Table 23: Buttons
70
Meaning
Action performed by the device after an unauthorized access:
Possible values:

none
The port continues to forward traffic without notification of the
intrusion.

trapOnly
The device sends a trap to the active management terminal.

portDisable
The device disables the port with the corresponding entry in the
port configuration table and sends a trap to the active
management terminal.
Security:Port Security
2.4 Port Security
dialog, "Action" page
RM GUI L2E
Release 8.0 05/2013