Ethernet/Ip - Hirschmann RS20 Reference Manual

Advanced
8.2.2

EtherNet/IP

This dialog allows you to activate the EtherNet/IP protocol. To integrate this
in a control system, perform the following steps.
General settings:
 In the Switching:Multicast:IGMP dialog, check whether IGMP is
activated (see on page 114 "IGMP (Internet Group Management
Protocol)").
EtherNet/IP settings:
 Activate EtherNet/IP in the "Operation" frame (default setting: Off).
 Click on "Download EDS File" to load the EDS file onto your PC.
Settings for the PLC:
 Configure the PLC as described in the "Industry Protocols" user manual.
Buttons

Button Meaning
Set Transfers the changes to the volatile memory (RAM) of the device. To
permanently save the changes, open the
dialog, select the location to save the configuration, and click "Save".
Reload Updates the fields with the values that are saved in the volatile memory
(RAM) of the device.
Help Opens the online help.
Table 143:Buttons
230
8.2 Industrial Protocols
Basic Settings:Load/Save
RM GUI L2E
Release 8.0 05/2013