Hirschmann RS20 Reference Manual page 181

Diagnostics
Parameters Meaning
Log SNMP Set Creates events for the syslog for SNMP
Request Set requests with the specified
"severity".
Severity (for logs of Specifies the level for which the device
SNMP Set creates the event "SNMP Set Request
Requests) received" for the list of the syslog
servers.
Table 113:Syslog and SNMP Logging settings
Parameters Meaning
Syslog server
entries
Index Sequential number of the syslog server
entry in the table.
When you delete an entry, this leaves a
gap in the numbering. When you create
a new entry, the device fills the first gap.
IP-Address Address of a syslog server to which the
device sends its log entries.
Port UDP port at which your syslog server
receives entries.
Minimum Severity Minimum severity for an event for the
device to sent a log entry for it to this
syslog server.
Active Activate or deactivate the current
syslog server entry in the table.
Table 114:Syslog server entries
RM GUI L2E
Release 8.0 05/2013
7.1 Syslog
Possible values
Active
inactive
debug
informational
notice
warning
error
critical
alert
emergency
Possible values
1 - 8
Valid IPv4 address
1 - 65535
debug
informational
notice
warning
error
critical
alert
emercency
active (box
selected)
inactive (box
empty)
Default
setting
inactive
notice
Default
setting
-
0.0.0.0
514
critical
inactive
181