Hirschmann RS20 Reference Manual page 13

Opening the Graphical User Interface
Figure 2: Login window
 Click on OK.
The user interface (Web-based Interface) of the device appears on the
screen.
Note: The changes you make in the dialogs will be copied to the volatile
memory of the device (RAM) when you click "Set". Click "Reload" to update
the display.
To save any changes made so that they will be retained after a power cycle
or reboot of the device use the save option on the "Load/Save" dialog (see
on page 38 "Load/Save").
RM GUI L2E
13
Release 8.0 05/2013