Rate Limiter Settings - Hirschmann RS20 Reference Manual

Switching
4.3.1

Rate limiter settings


"Ingress Limiter (kbit/s)" allows you to enable or disable the input limiting
function for all ports.
 "Egress Limiter (Pkt/s)" allows you to enable or disable the broadcast
output limiter function at all ports.

"Egress Limiter (kbit/s)" allows you to enable or disable the output limiter
function for all packet types at all ports.
Setting options per port:

"Inbound Packet Types" allows you to select the packet type for which the
limit is to apply:

All, limits the total inbound data volume at this port.

BC, limits the broadcast packets received at this port.
 BC + MC, limits broadcast packets and multicast packets received at
this port.

BC + MC + uUC, limits broadcast packets, multicast packets, and
unknown unicast packets received at this port.
 Inbound Limiter Rate for the inbound packet type selected:
 = 0, no inbound limit at this port.

> 0, maximum inbound traffic rate in kbit/s that can be received at this
port.
 Outbound Limiter Rate for broadcast packets:
 = 0, no rate limit for outbound broadcast packets at this port.

> 0, maximum number of outbound broadcasts per second that can be
sent at this port.

Outbound Limiter Rate for the entire data stream:
 = 0, no rate limit for outbound data stream at this port.

> 0, maximum outbound traffic rate in kbit/s sent at this port.
112
4.3 Rate Limiter
RM GUI L2E
Release 8.0 05/2013