System Data - Hirschmann RS20 Reference Manual

Basic Settings
1
Figure 5: Device status and alarm display
1 - The symbol displays the device state
2 - Cause of the oldest existing alarm
3 - Start of the oldest existing alarm

System Data


The fields in this frame show operating data and information on the
location of the device.
– the system name,
– the location description,
– the name of the contact person for this device,
– the temperature threshold values.
Name
Name
Location
Contact
Basic module
Media module 1
Media module 2
Media module 3
Media module 4
Media module 5
Media module 6
Media module 7
Power supply (P1/P2)
Uptime
Temperature (°C)
Table 1: System Data
RM GUI L2E
Release 8.0 05/2013
2 3
Meaning
System name of this device
Location of this device
The contact for this device
Hardware version of the device
Hardware version of media module 1
Hardware version of media module 2
Hardware version of media module 3
Hardware version of media module 4
Hardware version of media module 5
Hardware version of media module 6
Hardware version of media module 7
Status of power units (P1/P2)
Shows the time that has elapsed since this device was last
restarted.
Temperature of the device. Lower/upper temperature
threshold values. If the temperature goes outside this range,
the device generates an alarm.
1.1 System
19