Configuring The Tracking; Configuring Interface Tracking - Hirschmann MACH 4000 User Manual

Tracking

4.2 Configuring the tracking

You configure the tracking by setting up tracking objects. The following steps
are required to set up a tracking object:
Enter the tracking object ID number (track ID).
Select a tracking type, e.g interface.
Depending on the track type, enter additional options such as "port" or
"link up delay" in the interface tracking.
The registration of applications (e.g. VRRP) to which the tracking function re-
ports status changes is performed in the application itself.

4.2.1 Configuring interface tracking

Set up interface tracking at port 2.3 with a link down delay of 0 seconds
and a link up delay of 3 seconds at port 1.1.
Select the Routing:Tracking:Configuration dialog.
Click on "Create" at the bottom of the dialog.
The interface changes to the input dialog.
Enter the values you desire:
Track ID: 1
Type: interface
Link up delay: 3
Link down delay: 0
Module port: 2.3
Routing L3P
Release 4.0 11/07
4.2 Configuring the tracking
41