Industrial Protocols; Profinet - Hirschmann RS20 Reference Manual

Advanced

8.2 Industrial Protocols

The "Industry Protocols" menu allows you to configure the following protocols

the PROFINET protocol
 the EtherNet/IP protocol
 the IEC61850 MMS protocol
Detailed information on industrial protocols and PLC configuration is
contained in the User Manual "Industrial Protocols".
8.2.1

PROFINET

This dialog allows you to configure the PROFINET protocol. To integrate this
in a control system, perform the following steps.
General settings:
 In the Basic Settings:Network dialog, check whether Local is
selected in the "Mode" frame
 In the Switching:VLAN:Global dialog, check whether "VLAN 0
Transparent Mode" is selected
Note: Preclude a combination of the VLAN 0 Transparent mode and the
use of MSTP (Multiple Spanning Tree).
 Configure the alarm settings and the threshold values for the alarms you
want to monitor
Global PROFINET settings:
 Activate PROFINET in the "Operation" frame.
 Click on "Download GSDML File" to load the GSDML file onto your PC.
RM GUI L2E
Release 8.0 05/2013
(see on page 25
(see on page 121 "VLAN
(see on page 197 "Device
8.2 Industrial Protocols
"Network").
Global").
Status").
227