Tftp Bootcode Update - Hirschmann RS20 Reference Manual

Basic Settings 1.4 Software
The URL identifies the path to the software stored on the tftp server. The URL
is in the format
tftp://IP address of the tftp server/path name/file name
(e.g. tftp://192.168.1.1/device/device.bin).
 Select the "Firmware" radio button.
 Enter the URL for the software location.
 To load the software from the tftp server to the device, click "Update".
 To start the new software after loading, cold start the device.
See "Restart" on page 53.
1.4.4

TFTP Bootcode Update

For a tftp update you need a tftp server to store the required bootcode.
The URL identifies the path to the bootcode stored on the tftp server. The
URL is in the format
tftp://IP address of the tftp server/path name/file name
(for example: tftp://192.168.1.1/device/device_bootrom.bin).
Note: If an interrupt occurs during a Bootcode update, the device is
unrecoverable. Perform this update under the supervision of the Hirschmann
support desk.
 Select the "Bootcode" radio button.
 Enter the URL for the bootcode location.
 To load the bootcode from the tftp server to the device, click "Update".
 To start the new bootcode after loading, cold start the device.
See "Restart" on page 53.
RM GUI L2E
30
Release 8.0 05/2013