Basic Settings
1.7.1
Loading a Configuration
In the "Load" frame, you have the option to
load a configuration saved on the device,
load a configuration stored under the specified URL,
load a configuration stored on the specified URL and save it on the
device,
load a configuration saved on the PC in binary format.
load a configuration saved on the PC for the offline configurator in XML
format.
If you change the current configuration (for example, by switching a port off),
the graphical user interface changes the "load/save" symbol in the navigation
tree from a disk symbol to a yellow triangle. After saving the configuration,
the graphical user interface displays the "load/save" symbol as a disk again.
Loading configuration of the offline configurator
Installing and starting the offline configurator
To create a configuration file in the offline configurator, proceed as
follows:
If you have not installed the offline configurator on your PC yet: Install
the offline configurator by running the "Setup.exe" installation file from
the "ocf_setup" folder included on the CD-ROM.
Start the offline configurator by double-clicking the "Offline
Management" desktop symbol.
Creating an XML configuration file with the offline configurator
RM GUI L2E
Release 8.0 05/2013
1.7 Load/Save
39