Hirschmann RS20 Reference Manual page 123

Switching
Parameters Meaning
Mode Selecting the VLAN Mode.
"Independent VLAN" subdivides the
forwarding database
for MAC addresses")
independent forwarding database per VLAN.
The device cannot assign data packets with a
destination address in another VLAN and it
floods them to all the ports of the VLAN.
Application area: Setting up identical
networks that use the same MAC addresses.
"Shared VLAN" uses the same forwarding
database for all VLANs
"Filter for MAC
cannot assign data packets with a destination
address in another VLAN, and so only
forwards them to the destination port if the
receiving port is also a member of the VLAN
group of the destination port.
Application area: In the case of overlapping
groups, the device can distribute directly
across VLANs, as long as the ports involved
belong to a VLAN that can be reached.
Changes to the mode are only applied after a
warm start
performed on the device, and the changes
are then displayed in the line below under
"Status".
Status Displays the current status. After a warm start
(see on page 53 "Restart")
device take the setting for the "Mode" into the
status line.
Table 75: Settings and displays in the "Learning" frame
RM GUI L2E
Release 8.0 05/2013
(see on page 108 "Filter
virtually into one
(see on page 108
addresses"). The device
(see on page 53 "Restart")
on the device, the
Possible values Default setting
Independent
VLAN,
Shared VLAN
is
Independent
VLAN,
Shared VLAN
4.5 VLAN
Independent
VLAN
123