Basic Settings
Note: The following modular devices support this function: MS (soho),
PowerMICE (ms4128), MACH102 (soho) and MACH4000 (ex and dx) family.
Figure 8: "Modules" Dialog
This configuration table allows you to enable or disable the slots and also
displays the module parameters.
The "ID" column identifies the slot to which the entry refers.
The "Enabled" column activates network access to modules installed in
this slot. When disabled, the device places a red „X" over the slot in the
"Device View" frame of the
disabled, the device recognizes the module installed in this slot and the
module is configurable.
The "Type" column lists the type of module installed in the slot. A value of
none indicates that the slot is empty.
The "Description" column gives a short description of the installed
module.
The "Version" column lists the module version.
The "Ports" column lists how many ports are available on the module.
RM GUI L2E
Release 8.0 05/2013
1.2 Modules (MS, PowerMICE,
Basic Settings:System
MACH102 and MACH4000)
dialog. When
23