Hirschmann RS20 Reference Manual page 129

Switching
Redundancy
HIPER-Ring
MRP-Ring
Ring/Network coupling VLAN 1 U
Table 80: Required VLAN settings for ports that are part of redundant Rings or
Ring/Network coupling.
Note: In a redundant ring with VLANs, you should only operate devices
whose software version supports VLANs:
 RS2 xx/xx (from rel. 7.00)
 RS2-16M

RS20, RS30, RS40 (with software variants L2E, L2P)
 MICE (from rel. 3.0)
 PowerMICE

MS20, MS30

RSR20, RSR30
 MACH 100

MACH 1000

MACH 4000
 MACH 3000 (from Rel. 3.3),

OCTOPUS
Buttons

Button Meaning
Set Transfers the changes to the volatile memory (RAM) of the device. To
permanently save the changes afterwards, you open the
Settings:Load/Save
Reload Updates the fields with the values that are saved in the volatile memory
(RAM) of the device.
Create Adds a new table entry.
Remove Removes the selected table entry.
Help Opens the online help.
Table 81: Buttons
RM GUI L2E
Release 8.0 05/2013
VLAN membership
VLAN 1 U
any
dialog and click "Save".
4.5 VLAN
Basic
129