Switching Global - Hirschmann RS20 Reference Manual

Switching

4.1 Switching Global

Parameters Meaning
MAC address Display the MAC address of the device
(read only)
Aging Time (s) Enter the Aging Time in seconds for
dynamic MAC address entries.
In connection with the router redundancy,
select a time ≥ 30 s.
Activate Flow Activate/deactivate the flow control
Control
Table 59: Switching:Global dialog
Note: When you are using a redundancy function, you deactivate the flow
control on the participating device ports. If the flow control and the
redundancy function are active at the same time, there is a risk that the
redundancy function will not operate as intended.
Parameters Meaning
Address Activate/deactivate the learning of MAC
learning source addresses.
Frame size Set the maximum packet size (frame size)
in bytes.
Activate Enable/disable whether the device
Address detects whether it has repeatedly learned
Relearn the same MAC source addresses at
Detection different ports. This process very probably
indicates a loop situation in the network.
If the device detects this process, it
creates an entry in the log file and sends
an alarm (trap).
Table 60: Switching:Global dialog
104
4.1 Switching Global
Possible values Default setting
15-3825 30
On, Off Off
Possible values Default setting
On, Off On
1522, 1632 1522
On, Off Off
Release 8.0 05/2013
RM GUI L2E