Hirschmann RS20 Reference Manual page 182

Diagnostics
Note: When you activate the logging of SNMP requests, the device sends
these as events with the preset severity notice to the list of syslog servers.
The preset minimum severity for a syslog server entry is critical.
To send SNMP requests to a syslog server, you have a number of options to
change the default settings. Select the ones that meet your requirements
best.

Set the severity for which the device creates SNMP requests as events to
warning or error and change the minimum severity for a syslog entry
for one or more syslog servers to the same value.
You also have the option of creating a separate syslog server entry for
this.

Only set the severity for SNMP requests to critical or higher. The
device then sends SNMP requests as events with the severity critical
or higher to the syslog servers.

Only set the minimum severity for one or more syslog server entries to
notice or lower. Then it may happen that the device sends a large
number of events to the syslog servers.
Figure 48: Syslog dialog
182
7.1 Syslog
RM GUI L2E
Release 8.0 05/2013