Global Spanning Tree - Hirschmann RS20 Reference Manual

Redundancy
The following tables show the selection options and default settings, and
information on the global Spanning Tress settings for the bridge.
Parameter Meaning
s
Frame Switches the Spanning Tree function for
„Function" this device "On" or "Off".
If you switch off the Spanning Tree for a
device globally, the device floods the
Spanning Tree packets received like
normal Multicast packets to the ports.
Thus the device behaves transparently
with regard to Spanning Tree packets.
Table 104:Global Spanning Tree settings, basic function
In the "Protocol Configuration / Information" frame you can configure the
following values and read information.
Parameter Meaning
s
Column Information and configuration
„Bridge" parameters of the local device
Bridge ID The local Bridge ID, made up of the local
(read only) priority and its own MAC address.
The format is
ppppp / mm mm mm mm mm mm,
with: ppppp: priority (decimal) and
mm: the respective byte of the MAC
address (hexadecimal).
Priority Sets the local bridge priority.
The bridge priority and its own MAC
address make up this separate Bridge
ID. The device with the best (numerically
lowest) priority assumes the role of the
root bridge. Define the root device by
assigning the device the best priority in the
Bridge ID among all the devices in the
network.
Enter the value as a multiple of 4096.
Table 105:Global Spanning Tree settings, local bridge parameters
RM GUI L2E
Release 8.0 05/2013
6.3 Spanning Tree
Possible values Default setting
On, On
Off
Possible values Default setting
0 ≤ n*4096 ≤ 32768
61440
165