Diagnostics
7.11 MAC Notification
MAC notification, also known as MAC address change notification, tracks
users on a network by storing the MAC address change activity. When the
switch learns or removes a MAC address, the device sends an SNMP trap to
a configured trap destination. The device generates MAC address change
notifications for dynamic unicast MAC addresses.
The intended use of this function is for end device ports, where few MAC
address changes occur.
7.11.1 Operation
Parameters
Meaning
Operation
Activates/deactivates the MAC Notification function globally on the device.
Possible values:
Table 135:"Operation" frame in the
Notification
214
On
The device sends traps for the active rows to the active management
stations in
Diagnostics:Status Configuration:Alarms (Traps)
Off (default setting)
Diagnostics:Status Configuration:MAC
dialog
7.11 MAC Notification
RM GUI L2E
Release 8.0 05/2013
.