Deactivating The Service Mode - Hirschmann RS20 Reference Manual

Diagnostics 7.13 Service Mode

7.13.2 Deactivating the service mode

 Reactivate the redundant voltage.
The service mode is now deactivated.
 Select the Diagnostics:Service Mode dialog.
 Deactivate "Mode".
 Click "Set" to deactivate the service mode so that the device will no longer
switch to the service mode if the redundant voltage supply is lost.
Note: After the service mode is deactivated, the device takes on its previous
settings again.
Figure 62: Service Mode dialog - mode deactivated
RM GUI L2E
222
Release 8.0 05/2013