Sfp Transceiver - Hirschmann RS20 Reference Manual

Diagnostics
Buttons

Button Meaning
Set Transfers the changes to the volatile memory (RAM) of the device. To
permanently save the changes, open the
dialog, select the location to save the configuration, and click "Save".
Reload Updates the fields with the values that are saved in the volatile memory
(RAM) of the device.
Help Opens the online help.
Table 120:Buttons
7.3.3

SFP Transceiver

The SFP status display enables you to look at the current SFP module
connections and their properties. The properties include:
Parameters
Module.Port
Module type
Supported
Temperature in °C
Tx Power in mW
Rx Power in mW
Tx power in dBm
Rx power in dBm
Rx Power State
Table 121:SFP Modules dialog
190
Meaning
Port identification using module and port numbers of the device, e.g.
2.1 for port one of module two.
Type of SFP module, e.g. M-SFP-SX/LC.
Shows whether the media module supports the SFP module.
Shows the SFP's operating temperature.
Shows the transmission power in mW.
Shows the receive power in mW.
Shows the transmission power in dBm.
Shows the receive power in dBm.
Shows the power level of the signal received.
– good receiver power
– limited receiver power
– insufficient receiver power
7.3 Ports
Basic Settings:Load/Save
RM GUI L2E
Release 8.0 05/2013