Hirschmann RS20 Reference Manual page 109

Switching
Note: For Unicast addresses, the device allows you to include one or no
ports in a filter entry. Do not include any ports if you want to create a discard
filter entry.
Note: The filter table allows you to create up to 100 filter entries for Multicast
addresses.
Create

To set up a filter manually, click the "Create" button.
Parameters Meaning
VLAN ID Defines the ID of the VLAN to which the table entry applies.
Possible values:

Address Defines the destination MAC address to which the table entry applies.
Possible values:

Possible Ports Defines the device ports to which the device transmits data packets with
the destination MAC address:
 Select one port if the destination MAC address is a Unicast address.
 Select one or more ports if the destination MAC address is a Multicast
 Select no port to set up a discard filter. The device discards data
Table 63: "Create" window
RM GUI L2E
Release 8.0 05/2013
All VLAN IDs that are set up
Valid MAC address
Enter the value in one of the following formats:
– without a separator, e.g. 001122334455
– separated by spaces, e.g. 00 11 22 33 44 55
– separated by colons, e.g. 00:11:22:33:44:55
– separated by hyphens, e.g. 00-11-22-33-44-55
– separated by points, e.g. 00.11.22.33.44.55
– separated by points after every 4th character, e.g.
0011.2233.4455
address.
packets with the destination MAC address specified in the table entry.
4.2 Filter for MAC addresses
109