Signal Contact; Manual Setting - Hirschmann RS20 Reference Manual

Diagnostics

7.7 Signal contact

The signal contacts are used for
 controlling external devices by manually setting the signal contacts,

monitoring the functions of the device,
 reporting the device state of the device.
7.7.1

Manual Setting

 Select the "Signal Contact 1" or "Signal Contact 2" card index (for devices
with two signal contacts).
 Select the "Manual Setting" mode in the "Signal Contact Mode" field. This
mode enables you to control this signal contact remotely.
 Select "Open" in the "Manual Setting" field to open the contact.
 Select "Closed" in the "Manual Setting" field to close the contact.
Application options:

Simulation of an error during PLC error monitoring.
 Remote control of a device via SNMP, such as switching on a camera.
200
7.7 Signal contact
RM GUI L2E
Release 8.0 05/2013