Hirschmann RS20 Reference Manual page 110

Switching
Edit Entry

To manually adapt the settings for a table entry, click the "Edit Entry"
button.
Parameters Meaning
Possible Ports This column contains the ports available in the device.
Dedicated Ports This column contains the device ports that are assigned to the table entry.
 Select one port if the destination MAC address is a Unicast address.
 Select one or more ports if the destination MAC address is a Multicast
 Select no port to set up a discard filter. The device discards data
Table 64: "Edit Entry" window in the
Buttons

Button Meaning
Set Transfers the changes to the volatile memory (RAM) of the device. To
permanently save the changes afterwards, you open the
Settings:Load/Save
Reload Updates the fields with the values that are saved in the volatile memory
(RAM) of the device.
Create Adds a new table entry.
Edit Entry Opens the "Edit Entry" window.
Help Opens the online help.
> Moves the selected entry to the right column.
>> Moves all entries to the right column.
< Moves the selected entry to the left column.
<< Moves all entries to the left column.
Table 65: Buttons
110
address.
packets with the destination MAC address specified in the table entry.
Switching:Filters for MAC Addresses
dialog and click "Save".
4.2 Filter for MAC addresses
Basic
Release 8.0 05/2013
dialog
RM GUI L2E