Ptp Version 2 (Bc) (Ms20/Ms30, Powermice, Mach 104, Mach 1040) - Hirschmann RS20 Reference Manual

Time
Parameters Meaning
PTP Status Port is in the initialization phase.
Port is in the faulty mode. Error in
the PTP protocol.
PTP function is switched off at this
port.
Port has not received any
information and is waiting for
synchronization messages.
Port is in PTP pre-master mode.
Port is in PTP master mode.
Port is in PTP passive mode.
Port is in PTP uncalibrated mode.
Port is in PTP slave mode.
Table 43: Port dialog version 1
Buttons

Button Meaning
Set Transfers the changes to the volatile memory (RAM) of the device. To
permanently save the changes, open the
dialog, select the location to save the configuration, and click "Save".
Reload Updates the fields with the values that are saved in the volatile memory
(RAM) of the device.
Help Opens the online help.
Table 44: Buttons
3.3.3 PTP Version 2 (BC) (MS20/MS30,
PowerMICE, MACH 104, MACH 1040)
PTP version 2 provides considerably more settings. These support
- faster reconfiguration of the PTP network than in PTP version 1
- greater precision in some environments.
You select the PTP version you will use in the Time:PTP:Global dialog.
90
3.3 PTP (IEEE 1588)
Possible values
initializing
faulty
disabled
listening
pre-master
master
passive
uncalibrated
slave
Basic Settings:Load/Save
Default setting
RM GUI L2E
Release 8.0 05/2013