Hirschmann RS20 Reference Manual page 85

Time
The PTP modes

v1-boundary-clock

v2-boundary-clock-onestep

v2-boundary-clock-twostep

v2-transparent-clock
enable you to optimize time division accuracy.
You use these dialogs for this purpose
 Version 1
 Version 2 (Boundary Clock, BC)

Version 2 (Transparent Clock, TC)
The PTP modes

v1-simple-mode

v2-simple-mode
allow you to use the plug-and-play start-up.
Parameters Meaning
Operation on/off Enable/disable the PTP function
Table 34: Function IEEE 1588/PTP
Parameters Meaning
PTP Version- Version and
Mode mode of the
local clock.
Table 35: Configuration IEEE 1588/PTP, PTP version and mode, overview
1. For the MS20, MS30 and PowerMICE devices with MM23 or MM33
modules, see sections
and "Devices with PTP hardware support" on page
RM GUI L2E
Release 8.0 05/2013
1
Possible values
v1-boundary-clock
v1-simple-mode
v2-boundary-clock-onestep
v2-boundary-clock-twostep
v2-transparent-clock
v2-simple-mode
"Devices without PTP hardware support" on page 81
3.3 PTP (IEEE 1588)
Possible values
On, Off
Default setting
v1-boundary-clock
82.
Default setting
Off
85