Current Vlan - Hirschmann RS20 Reference Manual

Switching
4.5.2

Current VLAN

This dialog gives you the option of displaying the current VLAN parameters
The Current VLAN table shows all

manually configured VLANs

VLANs configured via redundancy mechanisms
The Current VLAN Table is only used for display purposes. You can make
changes to the entries in the VLAN:Static dialog
Static").
Parameters Meaning
VLAN ID Displays the ID of the VLAN.
Status Displays the VLAN status.
Creation time Operating time (see
Data") at which the VLAN was
created.
Ports x.x VLAN membership of the
relevant port and handling of
the VLAN tag.
Table 77: Current VLAN
RM GUI L2E
Release 8.0 05/2013
Possible values
other: This entry solely appears for
VLAN 1. The system provides VLAN 1.
VLAN 1 is always present.
permanent: A static entry made by you.
This entry is kept when the device is
restarted.
dynamic: This VLAN was created
dynamically via GVRP.
"System
- Currently not a member
T Member of VLAN; send data packets with
tag.
U Member of the VLAN; send data packets
without tag (untagged).
F Membership forbidden, so no entry
possible via GVRP either.
4.5 VLAN
(see on page 127 "VLAN
125