Hirschmann RS20 Reference Manual page 45

Basic Settings
Parameters Meaning
Value Value of the configuration
parameter (MIB variable),
which was set by loading the
offline configuration file.
SNMP error The device's success at
loading the respective
configuration parameter
Table 9: Information - Configuration - Tables View
Text View
Figure 20: Information - Configuration - Text View
In the Text View you get an overview in textual format of the configuration
parameters (MIB variables) that have loaded:
The device lists the individual configuration parameters in the following
form. The data are separated by commas:
 Position in the MIB, e.g. 1.3.6.1.2.1.1.4

Index

Value
 SNMP error (see

The last parameter has the value of 0. It is included for future
expansions.
RM GUI L2E
Release 8.0 05/2013
Possible values
see MIB
 (0) = Success
 (1) = Response PDU Too Big

(2) = Variable does not exist
 (3) = Cannot modify variable: Bad Value
 (4) = Cannot modify object, Read Only

(5) = Cannot perform operation, General
Error
table 9, "SNMP Error" parameter)
1.7 Load/Save
45