Ip Http Port; Ip Http Server - Cisco Sx350 Cli Manual

69
Web Server Commands

69.2 ip http port

To specify the TCP port used by the web browser interface, use the ip http port
Global Configuration mode command. To restore the default configuration, use the
no form of this command.
Syntax
port-number
ip http port
no ip http port
Parameters
port-number
port —For use by the HTTP server. (Range: 1–65534)
Default Configuration
The default port number is 80.
Command Mode
Global Configuration mode
Example
The following example configures the http port number as 100.
switchxxxxxx(config)# ip http port 100

69.3 ip http server

To enable configuring and monitoring the device from a web browser, use the ip
http server Global Configuration mode command. To disable this function, use the
no form of this command.
Syntax
ip http server
no ip http server
1317 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide